Starter Solenoid Cable Replacement (GMC LTG - AWD)
Removal Procedure
  1. Disconnect the battery negative cable.Battery Negative Cable Disconnection and Connection

    2. Object ID: 4578539
  2. Battery Distribution Engine Compartment Fuse Block Cover(1)»Open

    3. Object ID: 4584001
  3. Starter Solenoid Cable Nut(1)»Remove
  4. Starter Solenoid Cable(2)»Remove

    5. Object ID: 4582789
  5. Battery Tray(3)»Remove—Battery Tray Replacement

    6. Object ID: 4632160
  6. Retainer(1)@Transmission Wiring Harness Bracket (2)»Disengage[3x]

    7. Object ID: 4574324
  7. Power Transfer Unit Case(2)»Remove—Power Transfer Unit Case Replacement

    8. Object ID: 4726407
  8. Retainer(1)»Disengage
  9. Starter Solenoid Cable Nut(4)@Starter Solenoid»Remove
  10. Protective Cap(2)»Remove
  11. Starter Solenoid Cable Nut(3)@Generator»Remove
  12. Starter Solenoid Cable(5)»Remove
Installation Procedure

    Object ID: 4726407
  1. Starter Solenoid Cable(5)»Install

    2. Caution: Refer to Fastener Caution

  2. Starter Solenoid Cable Nut(4)@Starter Solenoid»Install and tighten12 N·m  (106 lb in)
  3. Starter Solenoid Cable Nut(3)@Generator»Install and tighten15 N·m  (11 lb ft)
  4. Protective Cap(2)»Install
  5. Retainer(1)»Engage

    6. Object ID: 4574324
  6. Power Transfer Unit Case(2)»Install—Power Transfer Unit Case Replacement

    7. Object ID: 4632160
  7. Retainer(1)@Transmission Wiring Harness Bracket (2)»Engage[3x]

    8. Object ID: 4582789
  8. Battery Tray(3)»Install—Battery Tray Replacement

    9. Object ID: 4584001
  9. Starter Solenoid Cable(2)»Install
  10. Starter Solenoid Cable Nut(1)»Install and tighten12 N·m  (106 lb in)

    11. Object ID: 4578539
  11. Battery Distribution Engine Compartment Fuse Block Cover(1)»Close
  12. Connect the battery negative cable.Battery Negative Cable Disconnection and Connection