Vacuum Pump Replacement
Removal Procedure
  1. Intake Manifold Cover»Remove—Intake Manifold Cover Replacement
  2. Power Brake Booster Vacuum Pipe@Vacuum Pump Assembly»Disconnect—Power Brake Booster Vacuum Pipe Replacement

    3. Object ID: 4326013
  3. Retainer(1)»Unclip[2x]
  4. Radiator Inlet Hose@Water Outlet»Disconnect—Radiator Inlet Hose Replacement

    5. Object ID: 4326031
  5. Vacuum Pump Bolt(1)»Remove[3x]

    6. Object ID: 4326049
  6. Vacuum Pump(1)»Remove

    7. Note: Inspect the vacuum pump gasket and replace as necessary.

  7. Vacuum Pump Gasket(2)»Remove

    8. Note: Inspect the vacuum pump seal and replace as necessary.

  8. Vacuum Pump Seal(3)»Lubricate the vacuum pump seal with clean engine oil.Adhesives, Fluids, Lubricants, and Sealers
Installation Procedure

    Object ID: 4326049
  1. Vacuum Pump Gasket(2)»Install
  2. Vacuum Pump(1)»Install

    3. Object ID: 4326031

    Caution: Refer to Fastener Caution.

  3. Vacuum Pump Bolt(1)»Install and tighten[3x]10 N·m (89 lb in)
  4. Radiator Inlet Hose@Water Outlet»Connect—Radiator Inlet Hose Replacement

    5. Object ID: 4326013
  5. Retainer(1)»Install[2x]
  6. Power Brake Booster Vacuum Pipe@Vacuum Pump Assembly»Connect—Power Brake Booster Vacuum Pipe Replacement
  7. Intake Manifold Cover»Install—Intake Manifold Cover Replacement