Throttle Body Assembly Replacement

Object ID: 4325439
Throttle Body Assembly Replacement

Callout

Component Name

Caution: Do not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as damage to the gasket surfaces and throttle body assembly may result.

Use care in cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as sharp tools may damage the gasket surfaces.

Caution: Do not use any solvent that contains Methyl Ethyl Ketone (MEK). This solvent may damage fuel system components.

Note: Do NOT prop open the throttle blade with the ignition key in the ON position as it MAY set a diagnostic trouble code (DTC).

    Preliminary Procedures
  1. Charge Air Cooler Outlet Air Tube Replacement
  2. Intake Manifold Cover Replacement

1

Electrical Connector

2

Throttle Body Bolt[4x]

Caution: Refer to Fastener Caution.

Tighten

10 N·m  (89 lb in)

3

Throttle Body

    Procedure
  1. Perform the intake system learned values reset. Intake System Learned Values Reset
  2. Perform the throttle body idle air flow compensation reset. Throttle Body Idle Air Flow Compensation Reset

4

Throttle Body Seal

Procedure

The seal is reusable, inspect the seal and replace if damaged.