Service Information
2017 Chevrolet Volt
|
Volt Service Manual (9301376)
|
Document ID: 4630252
Instrument Panel Trim Plate Applique Replacement - Left Side
Removal Procedure
Instrument Panel Knee Bolster(2)»Remove—
Instrument Panel Knee Bolster Replacement
Instrument Panel Switch Trim Plate(2)»Remove—
Instrument Panel Switch Trim Plate Replacement
Depress the three tabs on the instrument panel outer air outlet (1) from behind the instrument panel to properly release the outlet.
Instrument Panel Bolt(1)»Remove[2x]
Instrument Panel Outer Air Outlet - Left Side(2)»Remove
Use a flat bladed plastic tool to remove.
Release the plastic retaining tabs to separate the instrument panel outer air outlet (1) from the instrument panel trim plate applique (2).
Transfer components as necessary.
Installation Procedure
Install the instrument panel outer air outlet (1) to the instrument panel trim plate applique (2).
Instrument Panel Outer Air Outlet - Left Side(2)»Install
Caution:
Refer to
Fastener Caution
.
Instrument Panel Bolt(1)»Install and tighten[2x]
2.5N·m(22 lb in)
Instrument Panel Switch Trim Plate(2)»Install—
Instrument Panel Switch Trim Plate Replacement
Instrument Panel Knee Bolster(2)»Install—
Instrument Panel Knee Bolster Replacement
© General Motors, All rights reserved.