Restraints Control Module Replacement (Equinox)

Object ID: 4599559
Restraints Control Module Replacement (Equinox)

Callout

Component Name

Warning: Do not strike or jolt the Restraints Control Module (RCM). Before applying power to the RCM, make sure that it is securely fastened. Failure to observe the correct installation procedure could cause Supplemental Inflatable Restraint (SIR) deployment, personal injury, or unnecessary SIR system repairs.

Warning: Refer to SIR Warning.

    Preliminary Procedures
  1. Disable the SIR system.SIR Disabling and Enabling
  2. Floor Rear Air Outlet Duct Replacement - Left Side
  3. Floor Rear Air Outlet Duct Replacement - Right Side

1

Airbag Sensing and Diagnostic Module Nut[3x]

Caution: Refer to Fastener Caution.

Tighten

9 N·m (80 lb in)

2

Restraints Control Module

    Procedure
  1. Disconnect the electrical connectors.
  2. Perform the necessary programming and setup procedures:Control Module References
  3. Enable the SIR System.SIR Disabling and Enabling