Sunroof Window Motor Replacement

Object ID: 4593286
Sunroof Window Motor Replacement

Callout

Component Name

    Preliminary Procedures
  1. It is only necessary to lower the headlining. Only do those steps in the headlining procedure that will allow access to the component being removed.Headlining Trim Panel Replacement
  2. Disconnect the electrical connector.

1

Sunroof Window Motor Bolt [3x]

Caution: Refer to Fastener Caution.

Tighten

4 N·m (35 lb in)

2

Sunroof Window Motor

    Procedure
  1. With a turning motion, pull downward on the sunroof window motor to disengage the motor from the drive cables.
  2. Install the sunroof window motor to the frame with a turning motion, pushing upward to engage the motor into the drive cables.
  3. Sunroof/Sunshade Motor Initialization
  4. Verify the sunroof window motor operation.