Service Information
2020 GMC Terrain
|
Equinox, Terrain Service Manual (N America, Israel, MidEast - except Central America/Caribbean) (13286553)
|
Document ID: 4575292
Transmission Control Bracket Replacement
Removal Procedure
Transmission control »Remove—
Transmission Control Replacement
Remove the left instrument panel center support bracket bolt (1).
Remove the automatic transmission control bracket nuts (2) from the automatic transmission control bracket (3).
Remove the right instrument panel center support bracket bolt (1).
Remove the automatic transmission control bracket (2).
Installation Procedure
Position the transmission control bracket in the vehicle.
Caution:
Refer to
Fastener Caution
.
Install the automatic transmission control nuts (2) to the automatic transmission control bracket (3) and tighten to
9 N·m (80 lb in)
.
Install the left instrument panel center support bracket bolt (1) and tighten to
22 N·m (16 lb ft)
.
Install the right instrument panel center support bracket bolt (1) and tighten to
22 N·m (16 lb ft)
.
Transmission control »Install—
Transmission Control Replacement
© General Motors, All rights reserved.