Rear Closure Hands Free Module Replacement
Removal Procedure

    Object ID: 4571346
  1. Rear Bumper Fascia(1)»Remove—Rear Bumper Fascia Replacement
  2. Disconnect the electrical connector.

    3. Object ID: 4573326
  3. Rear Closure Hands Free Module Bolt(1)»Remove[4x]
Installation Procedure

    Object ID: 4573326

    Caution: Refer to Fastener Caution.

  1. Rear Closure Hands Free Module Bolt(1)»Install and tighten[4x]5 N·m (44 lb in)
  2. Connect the electrical connector.

    3. Object ID: 4571346
  3. Rear Bumper Fascia(1)»Install—Rear Bumper Fascia Replacement
  4. Perform the necessary programming and setup procedures:Control Module References