Control Valve Body Assembly Assemble (with ETRS)
Single Use Fasteners and Components

Control Valve Body Spacer Plate Retainer[2x]

Assemble Procedure

    Object ID: 4572666
  1. Control Valve Body Ball Check Valve(10)»Install

    2. Note: The plug, spring, and valve are exploded for visual purpose only.

  2. The park selector valve bore plug (3), park selector valve spring (2), and control valve body ball check valve (1) are not serviceable components. Clean components in the control valve body to best of ability.
  3. Park Selector Valve Spring(2)»Install
  4. Park Selector Valve Bore Plug(3)»Install
  5. Variable Feed Solenoid Clutch Accumulator Piston(4)»Install[2x]
  6. Variable Feed Solenoid Clutch Accumulator Piston Spring(5)»Install[2x]
  7. Control Valve Body Spacer Plate(6)»Install
  8. Control Valve Body Locating Pin(7)»Install[2x]
  9. Oil Transfer Plate(8)»Install

    10. Caution: Refer to Fastener Caution.

  10. Control Valve Solenoid Body Bolt(9)»Install and tighten[2x]9 N·m  (80 lb in)

    Object ID: 6054363
  1. Park Servo Piston Switch(1)»Install
  2. Mode Valve Position Switch(2)»Install

    3. Caution: Refer to Fastener Caution.

  3. Control Valve Solenoid Body Bolt(3)»Install and tighten[2x]9 N·m  (80 lb in)

    Object ID: 6054485
  1. Control Valve Body Ball Check Valve(1)»Install[8x]
  2. Control Valve Body Locating Pin(2)»Install[2x]
  3. Control Valve Body Spacer Plate(3)»Install
  4. Control Valve Body Spacer Plate Retainer(4)»Install NEW[2x]

    Object ID: 4572668
  1. Variable Feed Solenoid Clutch Accumulator Piston(1)»Install[2x]
  2. Variable Feed Solenoid Clutch Accumulator Piston Spring(2)»Install[2x]
  3. Transmission Fluid Cooler Ball Check Valve(3)»Install[2x]
  4. Control Valve Channel Plate Ball Check Valve Spring(4)»Install