DTC B1015
Diagnostic InstructionsDTC Descriptor
DTC B1015

Vehicle Identification Number Information

Symptom Byte Information:Symptom Byte List

Circuit/System Description

For an overview of the component/system, refer to:Parking Assist Description and Operation

Component

Description

K9 Body Control Module

Depending on the version, the control module can support different functions:

VIN Learn

K182 Parking Assist Control Module

The assembly has several functions:

  • VIN Learn
  • Parking Assist
Conditions for Running the DTC

Ignition=On

Conditions for Setting the DTC

The VIN stored in the control module and the VIN received via serial data from another control module are different.

Actions Taken When the DTC Sets

Parking Assist=Disabled

Conditions for Clearing the DTC

The conditions for setting the DTC no longer exist.

Reference Information

Schematic Reference

Parking Assistance Systems Schematics

Connector End View Reference

Master Electrical Component List

Description and Operation

Parking Assist Description and Operation

Electrical Information ReferenceScan Tool Reference

Control Module References

Circuit/System Verification
  1. Ignition » On / Vehicle » In Service Mode
  2. Verify DTC B1015 is not set
    • If the DTC is set
    1. Program the control module:K182 Parking Assist Control Module
    2. Ignition » On / Vehicle » In Service Mode
    3. Operate the vehicle within the Conditions for Running the DTC.

      Verify DTC B1015 is not set

      • If the DTC is set

        Replace the appropriate component:K182 Parking Assist Control Module

      • If the DTC is not set
    4. All OK.
    • If the DTC is not set
  3. All OK.
Repair Instructions

Perform the Diagnostic Repair Verification after completing the repair:Diagnostic Repair Verification

For control module replacement, programming, and setup refer to:Control Module References