Adaptive Cruise Control Module Replacement

Object ID: 2756773
Adaptive Cruise Control Module Replacement

Callout

Component Name

Preliminary Procedure

Remove the front bumper fascia energy upper absorber. Refer to Front Bumper Fascia Energy Upper Absorber Replacement.

1

Forward Range Radar Module Fastener (Qty: 2)

Caution: Refer to Fastener Caution.

2

Forward Range Radar Module Fastener

Tighten

9 N·m (80 lb in)

3

Forward Range Radar Module Bracket

4

Forward Range Radar Module Bracket Fastener (Qty: 3)

5

Forward Range Radar Module

    Procedure:
  1. Disconnect the electrical connector.
  2. For programming and set up, refer to Control Module References.
  3. Use a digital angle gauge to align the forward range radar module vertically (at the edge or on the bracket behind the module).

Note:

  • The digital angle gauge must have an accuracy of ±0.5 degrees (9 mm/m).
  • The vertical position of forward range radar module is 90 degrees (±3 degrees).