Operating Conditions: Vehicle in Service Mode

Ambient Air Temperature

15 °C

The scan tool displays outside temperature in °C.

Battery Voltage

12–14 V

The scan tool displays Volts. This is the current battery voltage signal.

Coolant Level Switch

Open

The scan tool displays either Open, Closed, or Not Available.

Driver Information Center Switch

Active/Inactive

The scan tool displays Active or Inactive. This is the state of the driver information center reset switch.

Driver Information Center Switch

Varies

The scan tool displays Volts. This is the current driver information center switch input voltage.

Inactive

The scan tool displays either Inactive, Up, Down, or Menu. This is the state of the driver information center switch.

Engine Speed

Varies

The scan tool displays the engine RPM.

Odometer Lock Status

Active/Inactive

The scan tool displays Active or Inactive. Active means the odometer is locked.

Washer Fluid Level Switch

Open

The scan tool displays either Open, Closed, or Not Available.

Vehicle Speed

Varies

The scan tool displays the vehicle speed.

All Indicators

This function is used to command all the indicators ON or OFF.

CAN Bus Configuration Learn

This function is used to Reset the source ID for low speed CAN Bus communications.

Driver Information Center Dimming

This function is used to command the dimming of the driver information display to Increase or Decrease by 10%.

Driver Information Center Options

This function is used to command the driver information center buttons using the scan tool.

Driver Information Center Segments

This function is used to command the driver information center segments ON and OFF.

Instrument Cluster Gauge Sweep

Since there are no gauges, the instrument cluster will go through a screen test sequence instead of sweeping the gauges.