Service Information
Control Valve Body Cover Removal
Callout | Component Name |
|---|---|
1 | Control Valve Body Cover Bolts M6 x 30 (Qty: 13) |
2 | Control Valve Body Cover |
3 | Control Valve Body Gasket Note: Discard the seal. It is not reusable. |
4 | Control Valve Body Cover Wiring Connector Hole Seal Caution: Support the control solenoid valve assembly around the connector when removing the seal. Excessive pulling force can damage the internal electrical connections. Note: Discard the seal. It is not reusable. |
5 | Shift Position Switch Connector |
6 | Output Speed Sensor Connector |
7 | Input Speed Sensor Connector |
Control Solenoid (With Body and TCM) Valve Assembly Removal
Callout | Component Name |
|---|---|
1 | Control Valve Body M5 x 40.5 (Qty: 3) |
2 | Control Valve Body Bolt M6 x 30 (Qty: 12) |
3 | Control Solenoid (with Body and TCM) Valve Assembly |
4 | Control Solenoid Valve Assembly Filter Plate Caution: Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter plate to the control solenoid valve assembly, resulting in possible damage or contamination. Note: Discard the filter plate. It is not reusable. |
Control Valve Body Assembly Removal
Callout | Component Name |
|---|---|
1 | Fluid Level Control Valve |
2 | Fluid Level Control Valve Gasket |
3 | Control Valve Body Bolt M6 x 60 (Qty: 9) |
4 | Control Valve Body Bolt M6 x 53 (Qty: 2) |
5 | Control Valve Body Assembly |
6 | Control Valve Body Spacer Plate Assembly |
7 | Manual Shaft Detent Spring Bolt M6 x 16 (Qty: 1) |
8 | Manual Shaft Detent Lever Spring Assembly |
9 | 1-2-3-4 Clutch Fluid Passage Seal Note: Discard the seal. It is not reusable. |
10 | Low/Reverse Clutch Fluid Passage Seal Note: Discard the seal. It is not reusable. |